Skip to content
  • Pawel Dembicki's avatar
    be89c9ee
    ramips: mt7620: Add support for D-Link DWR-961 A1 · be89c9ee
    Pawel Dembicki authored
    
    
    The DWR-961 A1 Wireless Router is based on the MT7620A SoC.
    It's a merge of two Amit boards: DWR-960 with ethernet part
    of Lava LR-25G001.
    
    ROMID it's taken from Telenor branded version and it works with tested
    device. Images from D-Link site for this router are from DWR-953 and it
    have ROMID DLK6E2424001. I don't know if it's mistake on web-site
    or if it's will require different image.
    
    Specification:
    
    - MediaTek MT7620A (580 Mhz)
    - 128 MB of RAM
    - 16 MB of FLASH
    - 1x 802.11bgn radio
    - 1x 802.11ac radio (MT7612 mpcie card)
    - 5x 10/100/1000 Mbps Ethernet: 4xLAN and 1xWAN (QCA8337)
    - 2x internal, non-detachable antennas (Wifi 2.4G)
    - 3x external, detachable antennas (2x LTE, 1x Wifi 5G)
    - 1x LTE modem cat 6
    - UART (J5) header on PCB (57600 8n1)
    - 13x LED, 2x button
    - JBOOT bootloader
    
    Installation:
    Apply factory image via http web-gui or JBOOT recovery page
    
    How to revert to OEM firmware:
    - push the reset button and turn on the power. Wait until LED start
      blinking (~10sec.)
    - upload original factory image via JBOOT http (IP: 192.168.123.254)
    
    Signed-off-by: default avatarPawel Dembicki <paweldembicki@gmail.com>
    be89c9ee
    ramips: mt7620: Add support for D-Link DWR-961 A1
    Pawel Dembicki authored
    
    
    The DWR-961 A1 Wireless Router is based on the MT7620A SoC.
    It's a merge of two Amit boards: DWR-960 with ethernet part
    of Lava LR-25G001.
    
    ROMID it's taken from Telenor branded version and it works with tested
    device. Images from D-Link site for this router are from DWR-953 and it
    have ROMID DLK6E2424001. I don't know if it's mistake on web-site
    or if it's will require different image.
    
    Specification:
    
    - MediaTek MT7620A (580 Mhz)
    - 128 MB of RAM
    - 16 MB of FLASH
    - 1x 802.11bgn radio
    - 1x 802.11ac radio (MT7612 mpcie card)
    - 5x 10/100/1000 Mbps Ethernet: 4xLAN and 1xWAN (QCA8337)
    - 2x internal, non-detachable antennas (Wifi 2.4G)
    - 3x external, detachable antennas (2x LTE, 1x Wifi 5G)
    - 1x LTE modem cat 6
    - UART (J5) header on PCB (57600 8n1)
    - 13x LED, 2x button
    - JBOOT bootloader
    
    Installation:
    Apply factory image via http web-gui or JBOOT recovery page
    
    How to revert to OEM firmware:
    - push the reset button and turn on the power. Wait until LED start
      blinking (~10sec.)
    - upload original factory image via JBOOT http (IP: 192.168.123.254)
    
    Signed-off-by: default avatarPawel Dembicki <paweldembicki@gmail.com>
Loading